FINANCINGContactGet a free quote

Back to all blog posts

Garage Door Repair Tips

On Track
August 18, 2020

Keeping your garage door in proper working condition is all about ensuring it’s well maintained. For instance, you want to perform an annual inspection to detect any issues before they start. Most maintenance steps can be done by the average DIYer, but hiring an expert allows you to have the added peace of mind that nothing is missed. It helps, therefore, to learn a few garage door repair tips.

Garage Door Repair Tips

garage door repair tips

In this article, we’ll discuss a few basic garage door repair maintenance tips. These are basic tips for tasks you can do on your own.

Basic Garage Door Maintenance

There are several basic maintenance tasks that you should either do yourself or hire out on an annual basis. Performing a few simple checks will help to prevent the need for future garage door repair.

Check the Tracks for Dents and Other Forms of Damage

With a rubber hammer, you should be able to pound out minor bends and blemishes. In case there’s major damage, you’ll need to have the tracks replaced altogether.

Take a Look at the Sensors

If you’re having trouble opening your garage door, it may be due to a blocked photo eye sensor. We have included this video to show you why removing items away from the sensor can repair your garage door.

Make Sure the Tracks Are Level and Properly Aligned

If they’re not aligned or level, loosen the mounting brackets then tap the tracks. You want to ensure the tracks are level and aligned by adjusting them accordingly.

Wipe Out the Tracks

Clean and clear all debris from the tracks. Start by removing dirt and debris with a large paintbrush before deep cleaning with a household cleaner.

Lubricate the Pulleys, Tracks and Rollers

You can use household lubricating oil for the rollers, and powdered graphite or a special garage door lubricant spray for the tracks and pulleys.

Check All Fasteners, Nuts and Bolts

Inspect the entire system and tighten anything loose in the process.

Inspect Springs and Cables

While you should never attempt to fix cables and springs yourself, it’s advisable to give them a visual inspection at least twice a year. Look for any fraying or rust in the cables as well as any worn ends or rust in the springs.

Replace Worn Garage Door Seals

If the garage door bottom seals are due for replacement, you can do it yourself. It’s a simple process that should take you only about an hour. All you need to do is to get rid of the seal and reattach. Ensuring your seal is in good condition will help to retain heat and also protect it from water and the elements.

Professional Garage Door Repair

It goes without saying that there are several maintenance tasks that should only be done by a professional garage door service. If you’re experiencing problems with the built-in safety reversal features of an automatic garage door opener, for example, you should call a technician right away. Failing to address the issue can result in damage to your vehicle, and even worse, personal injury.

BOTTOM LINE

With the garage door repair tips mentioned, you should have a well-functioning garage door all year round. Performing regular maintenance will help to minimize the number and cost of future repairs you’ll have to face. Should you run into any problem you can’t handle whether it range from repairs to replacing your residential garage door, be sure to seek the help of a qualified garage door specialist.

Tags:
Get the latest advice delivered straight to your inbox.
Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.